Norstar/Nortel Time Change Instructions:

Changing the time on a Norstar system must be done using a display phone. Using a M7310 or T7316 the right 2 buttons under the display are “NEXT” and “SHOW” respectively.

  1. To enter programming mode press “FEATURE” and “* * 2 6 6 3 4 4”
  2. Enter password (default = 266344) – display should read “Terminals & Sets”
  3. Press “NEXT” 5 times – display should read “Time and Date”
  4. Press “SHOW” – display should read “Hour:___”
  5. Press softkey “CHANGE”
  6. Enter hour – display should read “AM OK or Change”
  7. Select AM or PM
  8. Press “NEXT” – display should read “Minutes:___”
  9. Press softkey “CHANGE”
  10. Enter minutes
  11. Press “NEXT” – display should read “Year:___”
  12. Press softkey “CHANGE”
  13. Enter year
  14. Press “NEXT” – display should read “Month:___”
  15. Press softkey “CHANGE”
  16. Enter month
  17. Press “NEXT” – display should read “Day:___”
  18. Press softkey “CHANGE”
  19. Enter day
  20. Press “NEXT”

Norstar Meridian CICS
Time

  • Press “FEAT”.
  • Press “*”.
  • Press “*”.
  • Press “266344” (CONFIG) or “23646” (ADMIN).
  • Enter password “23456” (ADMIN) or “72787” (SCPLUS).
  • You will see “Terminals & Sets”.
  • Press “Next” five times.
  • Press “Show”
  • When you see “Hour”, press “Change” or “Next” to skip.
  • Type in the hour using military time as a 2 digit number.
  • Press “Next”.
  • When you see “Minutes”, press “Change” or “Next” to skip.
  • Type in the minutes using a 2 digit number.
  • Press “Next”.

Date:

  • When you see “Year”, press “Change” or “Next” to skip.
  • Type the year in 2-digit format.
  • Press “Next”.
  • When you see “Month”, press “Change” or “Next” to skip.
  • Type the month in 2-digit format.
  • Press “Next”.
  • When you see “Day”, press “Change” or “Next” to skip.
  • Type the day in 7-digit format.
  • Press “Next”.